ramps for sale: November 2013

Monday, November 18, 2013

Price Compare Race-R Low Profile Sports Car Ramps

Product Description

100% Solid core, lighweight low profile sport car ramps able to support up to 3,000 lbs (per pair). Each 56" L x 12" W x 8" H sport car ramp weighs only 10 lbs and features a trim 10.78 degree loading angle. Ideal for use with low ground clearance vehicles and will not damage hot asphalt, cement or painted floors.

List Price : ~~$279.99~~
Price : $203.99
You Save : $76
* Special discount only for limited time

Product Feature

3,000 lb. capacity (per pair) low profile vehicle service ramps
10-3/4° loading angle over a 56" length
Ideal for use with low ground clearance sports cars like Corvette C5s & C6s, Dodge Viper, Porches, Ferrari and the new Mustang
Portable, includes integrated carrying straps
Solid core polystyrene with high performance polyurethane construction will not damage asphalt, cement or painted floors

Race-R Low Profile Sports Car Ramps

Maybe you should visit the following website to get a better price and specification details

Related Seller :

Product Reviews

10 of 10 people found the following review helpful.
OMG these are great!!!
By Martin B. Hunt
I have a lowered Lexus and a VERY low 350Z. This ramp is an excellent asset to help when I have repairs on either when I need a lift.

2 of 2 people found the following review helpful.
Works for Cadillac STS owner
By Curt A. Meyers
I have a 2009 Cadillac STS, the car is very low to the ground in the front. With these ramps I am able to drive up without any issues. I am one step closer to a quick and easy oil change.

0 of 0 people found the following review helpful.
A great seller and an outstanding product
By 4Truth
The product is just as described and in fact, it looks even better than the description. Unfortunately for me, the size of my garage could not accommodate this beautiful product and I had to return it. The seller was very helpful and generous. I definitely recommend both the product and the seller. Without a doubt, I will buy again from the seller when opportunities arise.

Sunday, November 17, 2013

Low cost Race Ramps RR-TR-7-FLP 7" Trailer Ramp with Cut-Out

Product Description

Trailer Ramps RR-TR-7-FLP is the fifth variation in our line of car loading ramps. Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Does your trailer door have a door flap? Race Ramps has just the solution for you: simply lower your trailer door and place the door flap upon the nesting cut-out of these specially designed Trailer Ramps and decrease your angle of approach to as little as 5.5 degrees. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds. Trailer Ramps TR-7-FLP are ideal for low ground clearance cars with extra wide tires. Trailer Ramps help get low ground clearance vehicles onto trailers without scraping the nose on the trailer ramp door. Trailer Ramps are another innovative use of Brute Industries patented super lightweight 100% solid construction technology. Simply place the trailer door or existing ramps (see photo) of your open trailer on the notch of these specially designed ramps for a more gradual angle of approach. 6 1/4" high ramps are 74" long and 14" wide, reduce angle of approach to 5.5 degrees, and can accommodate tires up to 12" wide. Custom Trailer Ramps are also available, and are made special order to meet the users exact size requirements. Custom Trailer Ramps are Brute Industries most customized product. Trailer Ramps patented super-lightweight 100% solid construction ensures ramps are highly durable, virtually indestructible, and very stable - with the ability to support a 6,000 lb. vehicle. The ramps textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck®. Nor will they scratch, or otherwise damage floors. Trailer Ramps are lightweight, and have built-in straps to allow easy transport and the ability to be hung on a wall. Trailer Ramps are easy to clean and wont rust.

List Price : ~~$383.00~~
Price : $356.84
You Save : $26.16
* Special discount only for limited time

Product Feature

Special construction - won't scratch or mark your floors!
Lightweight - easy to carry and maneuver
Solid core - no holes or hollows for your favorite spider to live in!
Unscootable! Won't slip or slide, no matter the surface
Will not Damage Trailer Doors or Trailer

Race Ramps RR-TR-7-FLP 7" Trailer Ramp with Cut-Out

Maybe you should visit the following website to get a better price and specification details

Related Seller :

Product Reviews

0 of 0 people found the following review helpful.
The perfect ramp!
By Thomas A. Bergschneider
If your trailer has a fold down door extension, then these are the ramps to use. I can finally drive my 2002 Camaro SS into the trailer without scrapping the floor or the cars air dam when I take it road racing. The ramps are a little large to store, but a simple rack and your done. No more messing with blocks and jacking up the front of the trailer.

Saturday, November 16, 2013

What is the Best Price for Aluminum Ramp 6 ft. - Motorcycles Onto Trailers - Ramps

Product Description

Folding Aluminum RampModel # 444MCDRMade in the USA by Five Star Mfg.*Photos depict loading onto a trailer 16" high*This ramp is specially designed for loading motorcycles onto trailers.Eliminate the worry of safely loading your motorcycle. The ramp is 6 feet long by 44 inches wide (folds to 22 inches wide), giving you plenty of room to ride up the ramp while safely planting your feet. Most ATV ramps are rated for four wheel distribution and will fail under the weight of the largest cruisers riding up the middle of the ramp. Whereas this ramp handles the center weight and delivers under the most extreme circumstances! This ramp comes complete with two cam buckle tie down straps to safely secure the ramp to the trailer (please see photo above). For large cruisers, this ramp works well when loading onto surfaces up to 18" high. For trailer surfaces higher than 18" it is recommended that you utilize a 7 ft. long ramp, (the 7' version can be found in our Amazon storefront by clicking our company logo). We are one of the largest aluminum ramp distributors in the country, and we are committed to offering the consumer quality products at a fair price. This ramp can be shipped via Fed Ex Ground .

List Price : ~~$204.25~~
Price : $204.25
You Save : -
* Special discount only for limited time

Product Feature

1,500 lb. plus - distributed center load capacity
All aluminum, 6061 alloy construction. Lightweight, weighing only 38 lbs.
Built-in extra center support for loading the heaviest bikes.
Twice as many crossrods than normal ATV ramps, for safe footing
Serrated crossrod design for awesome traction

Aluminum Ramp 6 ft. - Motorcycles Onto Trailers - Ramps

Maybe you should visit the following website to get a better price and specification details

Related Seller :

Product Reviews

8 of 8 people found the following review helpful.
Aluminum Motorcycle Ramp
By Buildingmaker
This ramp more than met my expectations. Although the advertising claims 1500 lb. capacity, I was concerned about the ramp supporting my 1100 lb. Goldwing. I shouldn't have worried. This ramp is more than adequate to handle it. I use the ramp for regular entry and exit of the bike from it's storage shed. The elevation change is only about 12", but the 6' ramp keeps the bike from dragging center undercarriage. Goldwings have very low clearance. This ramp replaces an aluminum ramp that came with a name brand aluminum motorcycle trailer and bowed in the middle from the bike's weight. They wanted over $400 to replace it. I have checked this one several times and there is no evidence of any bending. Excellent ramp and I will look for another if I need a new one.

7 of 7 people found the following review helpful.
Handles my Electra Glide Ultra Classic perfectly
By Norman Fernandez
I am on a nationwide RV trip and purchased a Trinity 3 trailer to tow my Electra Glide Ultra Classic behind my RV. The small ramp that came with the trailer was not sufficient for me to ride my bike up on the trailer and to back down by myself. I purchased a ramp off of eBay but when I received it, it said that it only handled 1500 distributed pounds over the 3 folding panels. This meant that each panel only handled 500 pounds. There was no way I was going to try to load a 1000 pound motorcycle on that cheap thing. I found some other real expensive ramps, then I found this one. It was shipped fast, it is beefy and strong, and so far I have had no problems with it at all. I am loading one of the heaviest bikes on it by driving on and off by myself. Highly recommend.

7 of 7 people found the following review helpful.
Worked perfectly
By 74Vette
Works great. The ramp held my 200+ lbs and fully dressed Harley 900+ lbs with no problem. I like the fact that I can fold it in half (or not) and store it under my trailer. The straps holding the ramps in place is a good security feature that needs to be used all the time. Good construction, welds look good.